- Solar PV
- Wattage per project
Monocrystalline Solar Panel
Rooftop and ground-mounted arrays that feed hybrid or grid-tied inverters.
View details of Monocrystalline Solar Panel →
- Solar PV
- Equipment
Rooftop Solar Mounting System
Clamps, rails and frames that fix PV modules to factory, commercial and residential roofs.
- Rating
- Sized per roof
- Versions
- Metal-roof clamps, flat-roof frames, ballasted systems
Best for: Factory and warehouse roofs, commercial buildings and homes.
- Clamps matched to your roof profile
- No-penetration ballast option for flat roofs
- Fire-access aisles planned in the layout
- Aluminium rails with stainless fasteners
Most commercial solar-plus-storage projects start on a roof. The mounting system must hold the modules without overloading the structure or causing leaks.
Check the roof before the panels
We ask for the roof drawings or photos of the sheet profile first. Metal roofs take clamps that grip the seam or trapezoid ribs without drilling through the sheet where possible; flat concrete roofs take tilt frames, either anchored or ballasted with concrete blocks when penetrations are not allowed.
Wind and fire access
Edge and corner zones see the highest wind uplift, so fixings are denser there. Many fire codes require clear aisles across large roofs; we draw them into the layout from the start so the array is not cut back during approval.
Common configurations
- Metal-sheet roof clamps
- Concrete flat-roof tilt frames
- Ballasted (non-penetrating)
What we confirm before quoting
Our engineers check these points with you, so the quotation fits your site rather than a catalogue default.
- 1Roof structure and spare load capacity
- 2Roof material and sheet profile
- 3Waterproofing details
- 4Wind load and building height
- 5Fire-service access paths
Frequently asked questions
Will the roof take the extra weight?
That must be confirmed by a local structural engineer. We provide the distributed and point loads of the proposed system so the check can be done quickly.
Will drilling cause roof leaks?
On metal roofs we prefer clamps that grip the seam or rib without piercing the sheet. Where fixings must pass through, they use sealed washers and are placed on the crests, not in the water channels.
Can modules be installed flat on a concrete roof?
They can, but a small tilt helps rain wash off dust. Ballasted tilt frames are common where the roof cannot be drilled.
What documents come with a solar equipment order?
Commercial invoice, packing list, bill of lading, the datasheet of each item and the certificates you asked for at quotation stage. Certificates of origin or inspection reports can be added when your importer needs them.
How is warranty handled for buyers outside China?
Warranty terms are written into the quotation for each product. Claims start with photos, serial numbers and monitoring data; replacement parts are shipped from China, so we recommend keeping a small spares stock on larger projects.
Get a quote for the Rooftop Solar Mounting System
Tell us the application, location and target power or energy. Our engineers reply with a matched configuration and quotation.
Related products
- Solar PV
- Wattage per project
Bifacial Solar Panel
Ground-mount and tracker arrays over light-coloured ground.
View details of Bifacial Solar Panel →- Solar PV
- Sized per array
Fixed Ground-Mount Solar Structure
Open-land solar arrays, farms, mines and microgrid sites.
View details of Fixed Ground-Mount Solar Structure →- Solar PV
- Sized per plant
Solar Tracker
Larger ground-mount plants on flat or gently sloping land.
View details of Solar Tracker →
